'59-64 Pontiac Bonneville
Included in all 5 bolt-on, full-vehicle air ride systems:
7-Gallon Tank
Our custom-designed tank fits nicely between the framerails of most trucks. For those who will be mounting it in the trunk or bed, we offer specially-designed brackets that act as feet. This tank has 5 ports: two 3/8” ports on the ends; two ½” ports on the opposing faces; and a ¼” port for the drain on the bottom.
A common misconception with an aluminum tank is that users do not have to worry about rust. It is true that aluminum doesn’t rust, but condensation will occur in any tank, getting into your airlines and valves, causing rust and contaminating other major components. Our tank is made out of steel and has a coating inside and out for years of corrosion protection. This tank will last as long as you let it, if properly taken care for. It is 29" long (33” overall length with side flanges plus the 'feet') x 8" diameter.
454SSc Chrome Compressor Kit ("Super-C" systems include TWO)
These compressors are workhorses! They are built with top-quality components and are backed by a Lifetime Warranty! This kit includes hardware, airline, and fittings for remote filter mounting.
Fitting Pack
This pack comes with all of the fittings you need to assemble our system.
Front and Rear, Bolt-on, Powder-Coated Air Bag Brackets
Our brackets were designed with you in mind. We have custom made these brackets to fit your specific year vehicle. They are 100% bolt-on and require absolutely no welding. Just bolt these in place of your factory coils and you’re done. It’s as simple as that; just SET IT AND FORGET IT.
Each and every bracket is powder-coated, labeled, and includes all necessary hardware.
Front Shock Relocators & Shocks (2)
Shock absorbers are what actually control the movement of the vehicle's suspension under rough driving conditions. Properly set-up shocks allow for precise and predictable control over your vehicle; whether heavy accelerating, braking, or cornering. In air suspension systems, shocks can also be important for other reasons. Air is compressible, and air springs are essentially flexible pressure vessels and spring rates vary. This variance is dependent on the height of the spring and the pressure inside. In most cases, this variability, along with the inability of the air spring to dampen shock, causes the vehicle to bounce continuously after hitting an irregularity in the road. Bouncing could unload the tires and make handling difficult. Shocks dampen potential bouncing and allow the suspension to normalize very quickly keeping the contact patch of the tire pressed firmly against the road.
Note: The upper shock tower included in our kit will have to be professionally welded to the frame. The lower stud will simply be drilled and bolted to the lower A-arm.
AirLift Gen IV Dominator Series D2500 bags (4), single 1/2" port
Air Lift Performance is proud to announce the first model from the brand new Dominator series line of air springs! Featuring an unprecedented maximum restrained pressure of 600 psi, 7.7" usable stroke, and a load range of 294-2096 lbs. This bad boy will give you the performance you crave. With more lift, a softer, smoother ride, and the lowest price in the industry, you can’t go wrong with the new Dominator D2500!
FREE Survival Kit ($70 value)
Don't let the other guys charge you $50-$80 for this kit! We include it for FREE!
FREE Spare Air Kit ($100 value)
Now you can fill up your tires and spray off dust or water with your onboard air. The Spare Air kit includes a special brass "T" fitting to connect your pressure switch and a quick connect valve to your 7-gallon tank. Our Spare Air kit also allows you to fill up your air tank with the compressor in your garage or at a gas station. Our suspension systems are the first and only to now feature onboard air as a no-cost luxury that comes standard in every kit. Make your air ride kit more universal with our all-new Spare Air Kit.
Included
FREE Positive Battery Terminal ($25 value)
This Raptor PRO Series positive battery terminal will replace your old, worn terminal. It is satin nickel plated and has multiple connections making your install and future additions EZ. Connections include:
7-Gallon Tank
Our custom-designed tank fits nicely between the framerails of most trucks. For those who will be mounting it in the trunk or bed, we offer specially-designed brackets that act as feet. This tank has 5 ports: two 3/8” ports on the ends; two ½” ports on the opposing faces; and a ¼” port for the drain on the bottom.
A common misconception with an aluminum tank is that users do not have to worry about rust. It is true that aluminum doesn’t rust, but condensation will occur in any tank, getting into your airlines and valves, causing rust and contaminating other major components. Our tank is made out of steel and has a coating inside and out for years of corrosion protection. This tank will last as long as you let it, if properly taken care for. It is 29" long (33” overall length with side flanges plus the 'feet') x 8" diameter.
454SSc Chrome Compressor Kit ("Super-C" systems include TWO)
These compressors are workhorses! They are built with top-quality components and are backed by a Lifetime Warranty! This kit includes hardware, airline, and fittings for remote filter mounting.
- 100% Duty Cycle @ 100 psi and 50% Duty Cycle @ 200 psi
- Voltage: 12 Volt
- Max. Amperage: 23 Amps
- Max. Pressure: 200 psi
- Max. Duty Cycle (@72°F & 100 psi): 100%
- Flow Rate @ 0 psi (13.8 Volts): 1.76 CFM
Fitting Pack
This pack comes with all of the fittings you need to assemble our system.
Front and Rear, Bolt-on, Powder-Coated Air Bag Brackets
Our brackets were designed with you in mind. We have custom made these brackets to fit your specific year vehicle. They are 100% bolt-on and require absolutely no welding. Just bolt these in place of your factory coils and you’re done. It’s as simple as that; just SET IT AND FORGET IT.
Each and every bracket is powder-coated, labeled, and includes all necessary hardware.
Front Shock Relocators & Shocks (2)
Shock absorbers are what actually control the movement of the vehicle's suspension under rough driving conditions. Properly set-up shocks allow for precise and predictable control over your vehicle; whether heavy accelerating, braking, or cornering. In air suspension systems, shocks can also be important for other reasons. Air is compressible, and air springs are essentially flexible pressure vessels and spring rates vary. This variance is dependent on the height of the spring and the pressure inside. In most cases, this variability, along with the inability of the air spring to dampen shock, causes the vehicle to bounce continuously after hitting an irregularity in the road. Bouncing could unload the tires and make handling difficult. Shocks dampen potential bouncing and allow the suspension to normalize very quickly keeping the contact patch of the tire pressed firmly against the road.
Note: The upper shock tower included in our kit will have to be professionally welded to the frame. The lower stud will simply be drilled and bolted to the lower A-arm.
AirLift Gen IV Dominator Series D2500 bags (4), single 1/2" port
Air Lift Performance is proud to announce the first model from the brand new Dominator series line of air springs! Featuring an unprecedented maximum restrained pressure of 600 psi, 7.7" usable stroke, and a load range of 294-2096 lbs. This bad boy will give you the performance you crave. With more lift, a softer, smoother ride, and the lowest price in the industry, you can’t go wrong with the new Dominator D2500!
FREE Survival Kit ($70 value)
Don't let the other guys charge you $50-$80 for this kit! We include it for FREE!
- Relay
- Relay wire harness
- 40-amp fuse w/holder
- 8-gauge power wire (OXY Free/Not CCA)
- Teflon tape
- Thread locker/Loctite
- Cable ties
- Flashlight
- Stickers
FREE Spare Air Kit ($100 value)
Now you can fill up your tires and spray off dust or water with your onboard air. The Spare Air kit includes a special brass "T" fitting to connect your pressure switch and a quick connect valve to your 7-gallon tank. Our Spare Air kit also allows you to fill up your air tank with the compressor in your garage or at a gas station. Our suspension systems are the first and only to now feature onboard air as a no-cost luxury that comes standard in every kit. Make your air ride kit more universal with our all-new Spare Air Kit.
Included
- Brass "T"
- Quick-connect plug
- 25' coil air hose
- Air chuck
- Pencil air blowgun
FREE Positive Battery Terminal ($25 value)
This Raptor PRO Series positive battery terminal will replace your old, worn terminal. It is satin nickel plated and has multiple connections making your install and future additions EZ. Connections include:
- (1) 1/0 AWG output
- (1) 4 AWG output
- (2) 8 AWG output
For a side-by-side description comparison of our 5 systems, please read the top image on our Shop page. Otherwise, each system is described below the images here.
$1,469.72
Our "2-Barrel" system is for those who want all of the thrills without the frills. You’re good with front & back control thru reliable, manual valves for cruisin’ to the show low & slow. Plain & simple… simplicity over speed.
ALSO INCLUDED:
FB (Front-Back) Analog Control Panel
Our gauge panel features 1 of our exclusive domed-glass, dual-needle gauges along with 2 paddle valves for front and back control. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
Leak-Free Airline, 1/4"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
ALSO INCLUDED:
FB (Front-Back) Analog Control Panel
Our gauge panel features 1 of our exclusive domed-glass, dual-needle gauges along with 2 paddle valves for front and back control. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
Leak-Free Airline, 1/4"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
$1,499.72
Our "4-Barrel" system is probably the most budget-friendly air ride system on the planet with 4-corner control (FBSS) for more ‘play time,’ better handling, & more security. Plus, no wiring hassles with our great, manual valves. So track it, trip it, & trailer it at an affordable price. Simplicity over speed…plus.
SYSTEM UPGRADES INCLUDED:
FBSS (Front-Back-Side-to-Side) Dual Analog Control Panel
Our gauge panel features 2 of our exclusive domed-glass, dual-needle gauges along with 4 paddle valves for front, back, and side-to-side control. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
Leak-Free Airline, 1/4"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
SYSTEM UPGRADES INCLUDED:
FBSS (Front-Back-Side-to-Side) Dual Analog Control Panel
Our gauge panel features 2 of our exclusive domed-glass, dual-needle gauges along with 4 paddle valves for front, back, and side-to-side control. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
Leak-Free Airline, 1/4"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
$1,869.72
Our "EFI" system is for those that feel the need… the need for speed… & are cool with front & back control. The electric valves & larger airline in this kit are like switching out your carburetor for fuel injection; you get the same fuel delivery, but with a more responsive package. It’s simplicity AND speed.
SYSTEM UPGRADES INCLUDED:
FB (Front-Back) Electric Control Panel
This gauge panel features our exclusive, domed-glass, dual-needle gauge along with 2 momentary rocker switches for front and back control. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
3/8" Electric Valves
Our valve is the latest evolution in a line of valves known for reliability and speed. Featuring a 280 psi maximum operating pressure (although these have been known to exceed 300 psi), 3/8" ports, and a high 4.5 cV rating, these valves are designed to get your ride moving quickly!
Leak-Free Airline, 3/8"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
SYSTEM UPGRADES INCLUDED:
FB (Front-Back) Electric Control Panel
This gauge panel features our exclusive, domed-glass, dual-needle gauge along with 2 momentary rocker switches for front and back control. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
3/8" Electric Valves
Our valve is the latest evolution in a line of valves known for reliability and speed. Featuring a 280 psi maximum operating pressure (although these have been known to exceed 300 psi), 3/8" ports, and a high 4.5 cV rating, these valves are designed to get your ride moving quickly!
Leak-Free Airline, 3/8"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
$1,899.72
Our "Turbo" system is for those that feel the need for speed AND like to show it off a little. With the handheld, 3-button, wired switchbox, you can control front, back, & ‘pancake’ from inside your vehicle, or standing beside it! It’s too bad ‘pancake’ isn’t FOOD, but push the bottom of the center switch, & you drop your whole ‘ride’ like it’s hot… because it IS! Pushing the top raises the whole thing. Simplicity, speed, AND MORE FUN!
SYSTEM UPGRADES INCLUDED:
3-Rocker Switchbox
This controller is for a 4-valve setup. Top switch controls front up/down. Bottom switch controls rear up/down. Middle switch does all up/down, also known as ‘pancake’.
Dual-Needle Gauge Panel
This gauge panel features our exclusive, domed-glass, dual-needle gauge. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
3/8" Electric Valves
Our valve is the latest evolution in a line of valves known for reliability and speed. Featuring a 280 psi maximum operating pressure (although these have been known to exceed 300 psi), 3/8" ports, and a high 4.5 cV rating, these valves are designed to get your ride moving quickly!
‘Turbo’ Wire Kit
Connects your valves to your 3-button switch box and grounds your valves.
Leak-Free Airline, 3/8"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
SYSTEM UPGRADES INCLUDED:
3-Rocker Switchbox
This controller is for a 4-valve setup. Top switch controls front up/down. Bottom switch controls rear up/down. Middle switch does all up/down, also known as ‘pancake’.
Dual-Needle Gauge Panel
This gauge panel features our exclusive, domed-glass, dual-needle gauge. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
3/8" Electric Valves
Our valve is the latest evolution in a line of valves known for reliability and speed. Featuring a 280 psi maximum operating pressure (although these have been known to exceed 300 psi), 3/8" ports, and a high 4.5 cV rating, these valves are designed to get your ride moving quickly!
‘Turbo’ Wire Kit
Connects your valves to your 3-button switch box and grounds your valves.
Leak-Free Airline, 3/8"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
$2,199.72
Whether you’re taking it on a trip, tracking it, or trailering it, with the all-encompassing “Super-C” System, you can do it all. All the thrills AND all the frills! You get 4-corner control (FBSS), & you can fine-tune the speed of these USA-made aluminum, anodized manifold valves. It’s the easiest kit to install, & it’s great for fine-tuning your ride height & feel. You’ll be fast, but not furious, with our slowdown mufflers & optional flow controls. Time your suspension like you time your ignition. Dual Compressor Kits & the 7-button switchbox let you play the most! Set it & forget it!
SYSTEM UPGRADES INCLUDED:
7-Rocker Switchbox
Two, Dual-Needle Gauge Panel
This gauge panel features two of our exclusive, domed-glass, dual-needle gauges. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
Manifold Valve Set
These aluminum manifold valves are Made In The USA! They feature two 1/8" outlet ports for your gauges, two 3/8" outlet ports for your bags, two 1/8" outlet ports for slowdown silencers/mufflers, and a 3/8" inlet port. Each valve block controls both the raise and drop of one end of your vehicle, making your installation much cleaner. Gone are the days of having a complex setup for individual control at each corner. These valves give you true 4-Corner Control (4CC). The ½” inlet port from the tank allows for higher volume of air which lets you raise your vehicle at maximum speed. Included with these valves are slowdown mufflers/silencers that give you the ability to fine tune the speed and exhaust volume of the drop with the turn of a knob.
Leak-Free Airline, 3/8"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
DUAL 454SSc Chrome Compressor Kits
Yep, you get TWO of these amazing workhorses with your "Super-C" system!
SYSTEM UPGRADES INCLUDED:
7-Rocker Switchbox
- Cord with male and female connectors
- 12-volt inputs for your remote up and dump options - (Hooks up to your alarm or remote system. May require relays)
- Size is only 5" x 2" x 1"
- Controls 8 valves individually
Two, Dual-Needle Gauge Panel
This gauge panel features two of our exclusive, domed-glass, dual-needle gauges. These billet gauge panels were designed to give you that classic look when mounting them in your vehicle.
Manifold Valve Set
These aluminum manifold valves are Made In The USA! They feature two 1/8" outlet ports for your gauges, two 3/8" outlet ports for your bags, two 1/8" outlet ports for slowdown silencers/mufflers, and a 3/8" inlet port. Each valve block controls both the raise and drop of one end of your vehicle, making your installation much cleaner. Gone are the days of having a complex setup for individual control at each corner. These valves give you true 4-Corner Control (4CC). The ½” inlet port from the tank allows for higher volume of air which lets you raise your vehicle at maximum speed. Included with these valves are slowdown mufflers/silencers that give you the ability to fine tune the speed and exhaust volume of the drop with the turn of a knob.
Leak-Free Airline, 3/8"
Our air tubing is manufactured in the USA and made out of Nylon with leak-free technology. We give you enough of this airline to bag your entire ride.
DUAL 454SSc Chrome Compressor Kits
Yep, you get TWO of these amazing workhorses with your "Super-C" system!
Prices & details are subject to change at any time without notice. Vehicles shown either have our systems or are representative of what our systems can do.